MODERATE SPIN SESSION

There are different ways to determine levels (different resistances on gym bikes, different gears on cycles, and different manual assessments on spin bikes). For the purpose of these sessions, a simple rating system will be used for the level of resistance or gearing. Level 1 (easy), level 2 (easy-moderate), level 3 (moderate). level 4 (moderate - hard), level 5 (hard). The cadence will be standard. The samples provided however are only a guide, and all trainers should stay withing an exceptable range for there level of ability. Read 'Spinning Guide'

EFFORT
GEAR
CADENCE
Warm Up
5 mins easy then building
Level 1 - 3
80-90 rpm
Build Up
1 min mod / up cad
Level 3
90-100 rpm
 
1 min mod / up cad
Level 3
100-110 rpm
 
1 mins mod up cad
Level 3
110+ rpm
Recovery
30 sec easy
Level 2
80 rpm
 
1 min mod / high cad
Level 3
110+ rpm
Recovery
30 secs easy
Level 2
80 rpm
 
1 min mod-hard / high cad
Level 4
110+ rpm
Recovery
30 secs easy
Level 2
80 rpm
 
1 min hard / high cad
Level 5
110+ rpm
Recovery
2 minutes easy
Level 1
by feel
Drill
30 sec left leg / 30 sec right
Level 2
by feel
 
1 min together (hold form)
Level 2
90+ rpm
 
30 sec left leg / 30 sec right
Level 3
by feel
 
1 min together (hold form)
Level 3
90+ rpm
 
30 sec left leg / 30 sec right
Level 4
by feel
 
1 min together (hold form)
Level 4
90+ rpm
Recovery
2 minutes easy
Level 1
by feel
Core 1
5 mins moderate
Level 3
100+ rpm
 
1 min easy to moderate
Level 2
80-90rpm
 
4 mins moderately hard
Level 4

100+ rpm

 
1 min easy to moderate

Level 2

80rpm
 
3 mins moderate hard
Level 3
100+ rpm
 
1 min easy to moderate
Level 2
80rpm
 
2 mins moderately hard
Level 4
100+ rpm
 
1 min easy to moderate
Level 2
80rpm
 
1 min hard
Level 5
100+ rpm
Recovery
2 minutes easy
Level 1
by feel
Core 2
30 sec out of seat
Level 5

by feel

 
30 sec out of seat / up cad
Level 5
80rpm
 
30 sec hard / up cad
Level 5
110 rpm
 
30 sec hard / up cad
Level 5
sprinting
Recovery
1 minutes easy
Level 1
by feel
RPT
30 sec out of seat
Level 5

by feel

 
30 sec out of seat / up cad
Level 5
80rpm
 
30 sec hard / up cad
Level 5
110 rpm
 
30 sec hard / up cad
Level 5
sprinting
Cool down
5 mins easy
Level 1
by feel
Stretching
5+ minutes
Passive
Easy

Note: Where the Core 1 and Core 2 part is listed, this is the main or harder parts of your training session. Spice your sessions up by trailaing some different Core variables. Below are some samples, pick some that are suited to your level of ability and replace them in the above format.

 

CORE TRAINING OPTIONS

TIME TRIAL: Pick a time trial distance, or time (one that you will repeat in later sessions). For the athlete, you should mimic the gear and intensity you would in a road or track session for that distance. EG: 10 minute Time Trial in Level 4 at 100 rpm.

STANDARD INTERVALS: Pick an interval time, and an interval recovery. The gearing and intensity should be appropriate to the effort (short effort = higher level and higher cadence). This is like a standard track session. EG: 5 sets of 2 minute intervals at Level 5 / 100+ cadence, with a 1 minute moderate recovery at Level 2 / 80 cadence.
HIGH CADENCE INTERVALS: Where the standard interval has a set level of resistance repeated, the high cadence set could be done in a similar fashion without the emphasis on resistance, but on high cadence. Eg: 3 x 2 min intervals at Level 3 / 100 rpm. 2 x 2 min intervals at Level 3 / 110 rpm. 1 x 2 min effort at Level 3 / 120 rpm.
VARYING INTERVALS: Where the above interval is standard, you can vary this around for varying purposes. Eg: 'Hills to big gear wind-up used above (30sec out of seat, 30 sec out of seat up cad, 30 sec in seat level 5 / 110 cad, 30 sec sprint at level 5 / in very high cad. Eg: This 2 min variable could be repeated 5 times with a 2 min easy to moderate recovery at Level 2 / 80+ cad.
DECLINING SETS: This is where the set begins with a longer effort then decreases in duration to finish with a shorter effort. This will generally include an increase in resistance and cadence approaching the final effort. EG: 5 min Level 3 / 90+ cad (1 min recov) 4 min Level 4 / 90+ rpm (1 min recov), 3 min Level 5 / 90+ rpm (1 min recov), 2 min Level 5 / 110+ rpm (1 min recov), 1 min level 5 / 120+ rpm.
PYRAMID SETS: This is where you start out shorter, increase, then decreas again. EG: 1 min Level 5 / 80-90 rpm (1 min recov), 2 min Level 4 / 90-100 rpm (1 min recov), 3 min Level 3 / 199-110 rpm (1 min recov), 2 min Level 4 / 110-120 rpm (1 min recov), 1 min Level 5 / 120+ rpm.
DECLINING RECOVERY: Try doing one of the interval sets listed above with declining recovery. You are going to hate me for this one. EG: 5 min Level 3 / 90+ cad (1 min recov) 4 min Level 4 / 90+ rpm (45 sec recov), 3 min Level 5 / 90+ rpm (30 sec recov), 2 min Level 5 / 110+ rpm (15 sec recov), 1 min level 5 / 120+ rpm.
COMPILATIONS: Try doing a compilation of the above. EG: THE BIG PYRAMID - 1 min Level 5 / 90+ rpm (1 min recov), 2 min 'Hill to big gear wind up' (1 min recov), 3 min high cad Level 3 / 110 cad (1 min recov), 4 min Time Trial (1 min recov), 3 min high cad Level 3 / 110 cad (1 min recov), 2 min 'Hill to big gear wind up' (1 min recov), 1 min Level 5 120+ rpm.
ADVERTISED LINKS
 
... ...